硫磺使电池的存储能力增加10倍多
在 2011-10-11 发布
通过结合硫涂层中空碳纤维和电解液添加剂，研究人员设计出了一个电池，该电池克服了目前锂离子电池储能方面的缺陷。
随着硫阴极作为电池的一部分，电池更高的充电能力将可能使电池获得4-5倍于目前锂离子电池的储能能力。
Those challenges have limited the use of new technologies like electric cars and grid-scale energy storage because they don’t store enough energy relative to their volume and weight—their energy density is too low.
Solving the problem is largely a matter of finding new materials for the positively and negatively charged battery electrodes, the cathode and anode.
Previously, engineers led by Yi Cui, associate professor of materials science and engineering at Stanford University, reinvented battery anodes by making them with silicon nanowires.
New research reported in the journal Nano Letters, describes how Cui has now used sulfur-coated hollow carbon nanofibers and a special electrolyte additive to improve the other end of the rechargeable lithium ion battery, the cathode.
Putting silicon nanowire anodes and sulfur-coated carbon cathodes into one battery is the next generation of battery design, Cui says. “I strongly believe that’s a promising future choice to make better batteries.
“Sulfur is one of the materials that can offer a 10-times higher charge storage capacity but with about half the voltage of the existing battery.”
Both the charge capacity and the voltage affect how much energy a battery can deliver. With the sulfur cathode as part of a complete battery, the higher charge capacity makes it possible to build a battery with four to five times the energy storage compared to existing lithium ion battery technology.
Lithium-sulfur batteries have received attention because of the low cost and non-toxicity of sulfur. However, previous generations of lithium sulfur cathodes have not been viable for commercialization because they rapidly fail from repeated charging and recharging.
The new cathode fabrication resolves a number of material issues that, Cui says, “added together represent a really big challenge to get this material to work as a viable battery.”
In previous lithium-sulfur cathode designs, sulfur coats onto relatively open carbon structures, problematic because it exposes sulfur to the battery’s electrolyte solution. When intermediate reaction products called lithium polysulfides come into contact with the electrolyte solution, they reduce the battery’s capacity by dissolving into the electrolyte.
“This can be conflicting because on the one side we don’t want a large surface area contacting the sulfur and the electrolyte, and on the other hand we want a large surface area for electrical and ionic conductivities,” says graduate student Wesley Guangyuan Zheng,
The new design solves the conflict with a unique fabrication process that allows sulfur to coat the inside of a hollow carbon nanofiber, but not the outside. This fabrication process relies on a novel use of a commercially available filter technology that is normally applied to water filtration.
The new cathode design also improves battery capacity because it has a nearly closed structure that prevents polysulfides from significantly leaking out into the electrolyte solution. The length of a hollow nanofiber is about 300 times its diameter; the long and narrow channels prevent polysulfides from leaking out.
In addition to the energy storage gains made with improved sulfur hollow carbon nanofiber fabrication, graduate student Yuan Yang included an electrolyte additive that enhances the battery’s charge and energy efficiency, known as the coulombic efficiency.
“Without the additive you put 100 electrons into the battery and you get 85 out. With the additive, you get 99 out,” Cui says.
“To design the best structure we need both the electrode design and the electrolyte additive and these two combined together can give you a high capacity and high coulombic efficiency. We now have high capacity on both sides of the electrode; that’s exciting.”
随着硫阴极作为电池的一部分，电池更高的充电能力将可能使电池获得4-5倍于目前锂离子电池的储能能力。
Those challenges have limited the use of new technologies like electric cars and grid-scale energy storage because they don’t store enough energy relative to their volume and weight—their energy density is too low.
Solving the problem is largely a matter of finding new materials for the positively and negatively charged battery electrodes, the cathode and anode.
Previously, engineers led by Yi Cui, associate professor of materials science and engineering at Stanford University, reinvented battery anodes by making them with silicon nanowires.
New research reported in the journal Nano Letters, describes how Cui has now used sulfur-coated hollow carbon nanofibers and a special electrolyte additive to improve the other end of the rechargeable lithium ion battery, the cathode.
Putting silicon nanowire anodes and sulfur-coated carbon cathodes into one battery is the next generation of battery design, Cui says. “I strongly believe that’s a promising future choice to make better batteries.
“Sulfur is one of the materials that can offer a 10-times higher charge storage capacity but with about half the voltage of the existing battery.”
Both the charge capacity and the voltage affect how much energy a battery can deliver. With the sulfur cathode as part of a complete battery, the higher charge capacity makes it possible to build a battery with four to five times the energy storage compared to existing lithium ion battery technology.
Lithium-sulfur batteries have received attention because of the low cost and non-toxicity of sulfur. However, previous generations of lithium sulfur cathodes have not been viable for commercialization because they rapidly fail from repeated charging and recharging.
The new cathode fabrication resolves a number of material issues that, Cui says, “added together represent a really big challenge to get this material to work as a viable battery.”
In previous lithium-sulfur cathode designs, sulfur coats onto relatively open carbon structures, problematic because it exposes sulfur to the battery’s electrolyte solution. When intermediate reaction products called lithium polysulfides come into contact with the electrolyte solution, they reduce the battery’s capacity by dissolving into the electrolyte.
“This can be conflicting because on the one side we don’t want a large surface area contacting the sulfur and the electrolyte, and on the other hand we want a large surface area for electrical and ionic conductivities,” says graduate student Wesley Guangyuan Zheng,
The new design solves the conflict with a unique fabrication process that allows sulfur to coat the inside of a hollow carbon nanofiber, but not the outside. This fabrication process relies on a novel use of a commercially available filter technology that is normally applied to water filtration.
The new cathode design also improves battery capacity because it has a nearly closed structure that prevents polysulfides from significantly leaking out into the electrolyte solution. The length of a hollow nanofiber is about 300 times its diameter; the long and narrow channels prevent polysulfides from leaking out.
In addition to the energy storage gains made with improved sulfur hollow carbon nanofiber fabrication, graduate student Yuan Yang included an electrolyte additive that enhances the battery’s charge and energy efficiency, known as the coulombic efficiency.
“Without the additive you put 100 electrons into the battery and you get 85 out. With the additive, you get 99 out,” Cui says.
“To design the best structure we need both the electrode design and the electrolyte additive and these two combined together can give you a high capacity and high coulombic efficiency. We now have high capacity on both sides of the electrode; that’s exciting.”